References

Alam, N., L. Jarvis and D. Harris, 2002. Laser cladding for repair of engineering components. Aust. Welding J., 47: 38-47.

Cary, H.B. and S.C. Helzer, 2005. Modern Welding Technology. Pearson/Prentice Hall, New Jersey, ISBN: 9780131130296, Pages: 316.

Cheremisinoff, N.P., 1987. Practical Statistics for Engineers and Scientists. Technomic Publishing Company, Inc., Lancaster, PA.

Cochran, W.G. and G.M. Cox, 1957. Experimental Designs. 2nd Edn., John Wiley and Sons, New York.

Cochran, W.G. and G.M. Cox, 1963. Experimental Designs. 2nd Edn., John Wiley and Sons, Inc., New York, Pages: 613.

Cornu, J., 1988. Advanced Welding Systems. Vol. 2, IFS, Publications Ltd., UK.

Gunaraj, V. and N. Murugan, 1999. Prediction and comparison of the area of the heat-affected zone for the bead-on-plate and bead-on-joint in submerged arc welding of pipes. J. Mater. Process. Technol., 95: 246-261.
CrossRef  |  Direct Link  |  

Harris, P. and B.L. Smith, 1983. Factorial techniques for weld quality prediction. Metal Constr., 15: 661-666.

Juffus, L., 1999. Welding Principles and Applications. 4th Edn., Delmar Publishers, New York.

Khuri, A.I. and J.A. Cornell, 1996. Response Surfaces, Designs and Analyses. 2nd Edn., Marcell Dekker, Inc., New York.

Kumar, A. and S. Sundarrajan, 2009. Effect of welding parameters on mechanical properties and optimization of pulsed TIG welding of Al-Mg-Si alloy. Int. J. Adv. Manuf. Technol., 42: 118-125.
CrossRef  |  Direct Link  |  

Montgomery, D.C. and G.C. Runger, 1999. Applied Statistics and Probability for Engineers. 2nd Edn., John Wiley and Sons, New York.

Montgomery, D.C., 2001. Design and Analysis of Experiments. 5th Edn., John Wiley and Sons, New York.

Murugan, N. and R.S. Parmar, 1994. Effects of MIG process parameters on the geometry of the bead in the automatic surfacing of stainless steel. J. Mater. Process. Technol., 41: 381-398.
CrossRef  |  Direct Link  |  

Murugan, N. and R.S. Parmar, 1995. Effects of MIG process parameters on the geometry of the bead in the automatic surfacing of stainless steel. Int. J. Join. Mater., 7: 71-80.

Raja, A., K.L. Rohira and S. Samidas, 1999. Flux cored arc welding-selection of consumables, equipment's and applications. WRI J., 20: 124-129.

Rieber, F., 1985. Hand Book of welding. PWS-KENT Publishing Company, USA.

Walpole, R.E. and R.H. Myers, 1998. Probability and Statistics for Engineers and Scientists. 6th Edn., Prentice Hall, Upper Saddle River, NJ.