References

Ames, W. and A.T. Alpas, 1995. Wear mechanisms in hybrid composites of graphite-20 Pct SiC in A356 aluminum alloy (Al-7 Pct Si-0.3 Pct Mg). Metallurgical Mater. Trans. A, 26: 85-98.
CrossRef  |  Direct Link  |  

Cerit, A.A., B.M. Karamis, F. Nair and K. Yildizli, 2008. Effect of reinforcement particle size and volume fraction on wear behavior of metal matrix composites. Tribol. Ind., 30: 31-36.
Direct Link  |  

Kundu, S., B.K. Roy and A.K. Mishra, 2013. Study of dry sliding wear behavior of aluminium/SiC/Al₂O₃/graphite hybride metal metrix composite using taguchi technique. Int. J. Sci. Res. Publ., 3: 1-8.
Direct Link  |  

Leng, J., L. Jiang, G. Wu, S. Tian and G. Chen, 2009. Effect of graphite particle reinforcement on dry sliding wear of SiC/Gr/Al composites. Rare Metal Mater. Eng., 38: 1894-1898.
CrossRef  |  Direct Link  |  

Miyazaki, K., T. Hagio and K. Kobayashi, 1981. Graphite and boron carbide composites made by hot-pressing. J. Mater. Sci., 16: 752-762.
CrossRef  |  Direct Link  |  

Palanisamy, S., S. Ramanathan and R. Rangaraj, 2013. Analysis of dry sliding wear behaviour of Aluminium-Fly Ash composites: The Taguchi approach. Adv. Mech. Eng., Vol. 2013 10.1155/2013/658085

Prabu, S.B., L. Karunamoorthy, S. Kathiresan and B. Mohan, 2006. Influence of stirring speed and stirring time on distribution of particles in cast metal matrix composite. J. Mater. Process. Technol., 171: 268-273.
CrossRef  |  Direct Link  |  

Taguchi, G., S. Konishi and S. Konishi, 1987. Taguchi Methods Orthogonal Arrays and Linear Graphs: Tools for Quality Engineering. American Supplier Institute, Dearborn, MI., USA., ISBN-13: 9780941243018, pp: 35-38.

Toptan, F., I. Kerti and L.A. Rocha, 2012. Reciprocal dry sliding wear behaviour of B₄C_p reinforced aluminium alloy matrix composites. Wear, 290-291: 74-85.
CrossRef  |  Direct Link  |