References

Beach, M.M., E.V. Weinberg and D.N. Surnov, 1979. Lubrication Aircraft Gas Turbine Engines. Mechanical Engineering, Moscow, Russia, Pages: 176.

Evans, J., L.M. Stevens, C. Bodily and M.K.B. Kang, 2004. Prediction of velocities and heat transfer coefficients in a rotor-stator cavity. Proceedings of the ASME Turbo Expo 2004: Power for Land, Sea and Air, Volume 4, June 14-17, 2004, Vienna, Austria, pp: 1-9.

Falaleev, S.V., 2014. Hydrodynamic characteristics of the face seal taking into account lubricant film breakdown, inertial forces and complex clearance form. Life Sci. J., 11: 337-343.
Direct Link  |  

Flouros, M., 2004. Oil pumping in high speed and high loaded ball bearings. Proceedings of the ASME Turbo Expo Power for Land, Sea and Air, June 14-17, 2004, Vienna, Austria, pp: 1-5.

Glukharev, E.G. and N.I. Zubarev, 1983. Gear Connections. Mechanical Engineering, Moscow, Russia, Pages: 270.

Hart, K., 2008. Basic architecture and sizing of commercial aircraft gas turbine oil feed systems. Proceedings of the ASME Turbo Expo Power for Land, Sea and Air, June 9-13, 2008, Berlin, Germany, pp: 1-11.

Kapinos, V.M., V.N. Pustovalov, V.V. Nawrocki and S.P. Naumenko, 2004. Improved algorithm of successive calculation of turbine in the parameters for the last stage. Bulletin of NTU KhPI, No. 11, USA., pp: 105-108.

Kirpichev, M.V., M.A. Mikheev and L.S. Eigenson, 1940. Heat Transfer. Gosenergoizdat, Moscow, Russia, Pages: 292.

Klingsporn, M., 2004. Advanced transmission and oil system concepts for modern aero-engines. Proceedings of the ASME Turbo Expo Power for Land, Sea and Air, June 14-17, 2004, Vienna, Austria, pp: 1-8.

Kuz'michev, V.S., V.N. Rybalko, A.Y. Tkachenko and I.N. Krupenich, 2014. Optimization of working process parameters of gas turbine engines line on the basis of unified engine core. ARPN J. Eng. Applied Sci., 9: 1873-1878.
Direct Link  |  

Lebeck, A.O., 1991. Principles and Design of Mechanical Face Seals. John Wiley and Sons, New York, USA., ISBN-13: 9780471515333, Pages: 764.

Meyer, E., 1978. Face Seals. Mechanical Engineering, Moscow, Russia, Pages: 288.

Montenay, A., L. Pate and J.M. Duboue, 2000. Conjugate heat transfer analysis of an engine internal cavity. Proceedings of the ASME Turbo Expo 2004: Power for Land, Sea and Air, Volume 3, May 8-11, 2000, Munich, Germany, pp: 10-10.

Myshkin, N.K. and M.I. Petrokovets, 2006. [Friction, Lubrication, Deterioration. Physical Basis and Engineering Applications of Tribology]. Fizmatizdat, Moscow, Pages: 368, (In Russian).

Saunders, K., S. Alizadeh, L.V. Lewis and J. Provins, 2007. The use of CFD to generate heat transfer boundary conditions for a rotor-stator cavity in a compressor drum thermal mode. Proceedings of the ASME Turbo Expo Power for Land, Sea and Air, May 14-17, 2007, Montreal, Canada, pp: 1-12.

Tryanov, A.E., O.A. Grishanov and A.S. Vinogradov, 2009. About Thermal Protection Oil Cavities GTD Supports. SSAU Publ., Samara, Russia, pp: 318-329.

Vinogradov, A.S., 2014. Seal design features for systems and units of aviation engines. Life Sci. J., 11: 575-580.
Direct Link  |