Journal of Engineering and Applied Sciences

Year: 2016
Volume: 11
Issue: 4
Page No. 767 - 771

Modeling of Different CO2 Injection Scenarios in 2 One of the Iranian Oil Reservoirs

Authors : Zohreh Rezaei Kavanrudi, Mohammad Afkhami Karaei and Amin Azdarpour

Abstract: This studys aims to investigate and compare different gas injection methods in one of Iranian oil reservoirs that are done using Eclipse 300 Software. This study investigates recovery factor, cumulative recovery and the effective parameters of gas injection during different procedures of CO2 gas injection and Water Alternating Gas (WAG) injection. At last, recovery factor and cumulative recovery are studied and compared during different WAG injection scenarios to specify an optimized pattern of injection. Laboratory data of reservoir rock and fluid are matched in PVTi Software and the results are imported into Eclipse for modeling miscible CO2 injection and WAG injection. The results showed that oil recovery during WAG injection in reservoir and miscible CO2 injection is 31.8 and 25.8%, respectively. In case if WAG injection is highly suggested instead of miscible CO2 injection.

How to cite this article:

Zohreh Rezaei Kavanrudi, Mohammad Afkhami Karaei and Amin Azdarpour, 2016. Modeling of Different CO2 Injection Scenarios in 2 One of the Iranian Oil Reservoirs. Journal of Engineering and Applied Sciences, 11: 767-771.

Design and power by Medwell Web Development Team. © Medwell Publishing 2024 All Rights Reserved