References

Abdullah, A.B., L.Y. Chia and Z. Samad, 2008. The effect of feed rate and cutting speed to surface roughness. Asian J. Scientific Res., 1: 12-21.
CrossRef  |  Direct Link  |  

Axinte, D.A. and R.C. Dewes, 2002. Surface integrity of hot work tool steel after high speed milling-experimental data and empirical models. J. Mater. Process. Technol., 127: 325-335.
CrossRef  |  

Benardos, P.G. and G.C. Vosniakos, 2002. Prediction of surface roughness in CNC face milling using neural networks and taguchi`s design of experiments. Robotics Comput. Integrated Manuf., 18: 343-354.
CrossRef  |  

Dhokia, V.G., S. Kumar, P. Vichare and S.T. Newman, 2008. An intelligent approach for the prediction of surface roughness in ball-end machining of polypropylene. Robotics Comput. Integrated Manufact., 24: 835-842.
CrossRef  |  

Ghani, J.A., I.A. Choudhury and H.H. Hassan, 2004. Application of Taguchi method in the optimization of end milling parameters. J. Mater. Process. Technol., 145: 84-92.
CrossRef  |  Direct Link  |  

Gologlu, C. and N. Sakarya, 2008. The effects of cutter path strategies on surface roughness of pocket milling of 1.2738 steel based on Taguchi method. J. Mater. Process. Technol., 206: 7-15.
CrossRef  |  

Habeeb, H.H., K.A. Abou-El-Hossein, B. Mohamad, J.A. Ghani and K. Kadirgama, 2008. Investigating of tool wear, tool life and surface roughness when machining of nickel alloy 242 with using of different cutting tools. Asian J. Scientific Res., 1: 222-230.
CrossRef  |  Direct Link  |  

Hafiz, A.M.K., A.K.M.N. Amin, A.N.M. Karim and M.A. Lajis, 2007. Development of surface roughness prediction model using response surface methodology in high speed end milling of AISI H13 tool steel. Proceedings of the 2007 IEEE International Conference on Industrial Engineering and Engineering Management. Dec. 2-4, IEEE, USA., pp: 1868-1872.

Ho, W.H., J.T. Tsai, B.T. Lin and J.H. Chou, 2009. Adaptive network-based fuzzy inference system for prediction of surface roughness in end milling process using hybrid Taguchi-genetic learning algorithm. Expert Syst. Appl., 36: 3216-3222.
CrossRef  |  

Jaharah, A.G., C.H.C. Hassan and N. Muhamad, 2009. Machined surface of AISI H13 tools steels when end milling using P10 tin coated carbide tools. Eur. J. Sci. Res., 26: 247-254.
Direct Link  |  

Kadirgama, K., M.M. Noor, M.M. Rahman, K.A. Abou-El-Hossein, B. Mohammad and H. Habeeb, 2009. Effect of milling parameters on frictions when milling hastelloy C-22HS: A FEM and statistical method. Trends Applied Sci. Res., 4: 216-228.
CrossRef  |  Direct Link  |  

Lee, K.Y., M.C. Kang, Y.H. Jeong, D.W. Lee and J.S. Kim, 2001. Simulation of surface roughness and profile in high speed end milling. J. Mater. Process. Technol., 113: 410-415.
CrossRef  |  

Lim, E.M., H.Y. Feng, C.H. Meng and Z.H. Lin, 1995. The prediction of dimensional error for sculptured surface productions using the ball-end milling process. Part 1: Chip geometry analysis and cutting force prediction. Int. J. Mach. Tools Manufact., 35: 1149-1169.
CrossRef  |  

Lou, M.S., J.C. Chen and C.M. Li, 1999. Surface roughness prediction technique for CNC end-milling. J. Ind. Technol., 15: 1-6.
Direct Link  |  

Mansoura A. and H. Abdalla, 2002. Surface roughness model for end milling: A semi-free cutting carbon casehardening steel (EN32) in dry condition. J. Mater. Process. Technol., 124: 183-191.
CrossRef  |  

Novakova, J., L. Petrkovska, J. Brychta, R. Cep and L. Ocenasova, 2009. Influence of high speed parameters on the quality of machined surface. World Acad. Sci. Eng. Technol., 56: 274-277.
Direct Link  |  

Onwubolu, G.C., 2005. A note on surface roughness prediction model in machining of carbon steel by PVD coated cutting tools. Am. J. Applied Sci., 2: 1109-1112.
CrossRef  |  Direct Link  |  

Ozcelik, B. and M. Bayramoglu, 2006. The statistical modeling of surface roughness in high-speed flat end milling. Int. J. Machine Tools Manufacture, 46: 1395-1402.
CrossRef  |  

Patwari, M.A.U., A.K.M.N. Amin and W. Faris, 2010. Identification of instabilities of the chip formation and it`s prediction model during end milling of medium carbon steel (S45C). Am. J. Eng. Applied Sci., 3: 193-200.
CrossRef  |  Direct Link  |  

Reddy, B.S., G. Padmanabhan and K.V.K. Reddy, 2008. Surface roughness prediction techniques for CNC turning. Asian J. Sci. Res., 1: 256-264.
CrossRef  |  Direct Link  |  

Suhail, A.H., N. Ismail, S.V. Wong and N.A. Abdul Jalil, 2010. Optimization of cutting parameters based on surface roughness and assistance of workpiece surface temperature in turning process. Am. J. Eng. Applied Sci., 3: 102-108.
CrossRef  |  Direct Link  |  

Suhail, A.H., N. Ismail, S.V. Wong and N.A. Abdul Jalil, 2011. Workpiece surface temperature for in-process surface roughness prediction using response surface methodologyac. J. Applied Sci., 11: 308-315.
CrossRef  |  

Tang, W.X., Q.H. Song, S.Q. Yu, S.S. Sun, B.B. Li, B. Du and X. Aia, 2009. Prediction of chatter stability in high-speed finishing end milling considering multi-mode dynamics. J. Mater. Process. Technol., 209: 2585-2591.
CrossRef  |  

Vivancos, J., C.J. Luis, J.A. Ortiz and H.A. Gonzalez, 2005. Gonzalez, 2005. Analysis of factors affecting the high-speed side milling of hardened die steels. J. Mater. Process. Technol., 162-163: 696-701.
CrossRef  |  

Xu, A.P., Y.X. Qu, D.W. Zhang and T. Huang, 2003. Simulation and experimental investigation of the end milling process considering the cutter flexibility. Int. J. Mach. Tools Manufacture, 43: 283-292.
CrossRef  |