References

Chanda, M. and S.K. Roy, 2008. Industrial Polymers, Specialty Polymers and their Applications. Vol. 74, CRC Press, USA., ISBN:978-1-4200-8509-9, pp: 3-79.

Hilmi, O.M. and M.A.S. Yulis, 2012. Optimising injection moulding parameters that satisfies part qualities by using Taguchi method. Proceedings of the 2012 IEEE Conference on Business Engineering and Industrial Applications Colloquium (BEIAC), April 7-8, 2012, IEEE, Batu Pahat, Malaysia, ISBN:978-1-4673-0425-2, pp: 307-312.

Ibrahim, M.H.I., M.Z. Zainol, M.H. Othman, A.M. Amin and R. Asmawi, 2014. Optimisation of processing condition using Taguchi method on strength of HDPE-natural fibres micro composite. Appl. Mech. Mater., 660: 33-37.
CrossRef  |  Direct Link  |  

Megat-Yusoff, P.S.M., M.R.A. Latif and M.S. Ramli, 2011. Optimizing Injection Molding Processing Parameters for Enhanced Mechanical Performance of Oil Palm Empty Fruit Bunch High Density Polyethylene Composites J. Applied Sci., 11: 1618-1623.

Mehat, N.M. and S. Kamaruddin, 2011. Optimization of mechanical properties of recycled plastic products via optimal processing parameters using the Taguchi method. J. Mater. Process. Technol., 211: 1989-1994.
Direct Link  |  

Mohd, H.O., S. Hasan, W.N.A.W. Muhammad and Z. Zuramashana, 2013. Optimising injection moulding parameter setting in processing polypropylene-clay composites through Taguchi method. Appl. Mech. Mater., 271: 272-276.
Direct Link  |  

Muhammad, W., W.N. Azrina, M.H. Othman, S. Hasan and M.F. Ruslee, 2013. A study of injection moulding optimum parameters to control shrinkage and warpage of polypropylene-nanoclay hinges samples. Proceedings of the International Conference of Mechanical Engineering, December 17-18, 2013, Hotel Equatorial, Bangi, Malaysia, pp: 1011-1015.

Othman, M.H., H. Sulaiman and B.M. Wahab, 2014. A review of polypropylene nanoclay nanocomposites: Preparation, properties and applications. Appl. Mechan. Mater., 465: 944-948.
CrossRef  |  Direct Link  |  

Othman, M.H., S. Shamsudin and S. Hasan, 2012. The effects of parameter settings on shrinkage and warpage in injection molding through Cadmould 3D-F simulation and Taguchi method. Appl. Mech. Mater., 229: 2536-2540.
Direct Link  |  

Othman, M.H., S. Shamsudin, S. Hasan and M.N.A. Rahman, 2012. The effects of injection moulding processing parameters and mould gate size towards weld line strength. Adv. Mater. Res., 488: 801-805.
Direct Link  |  

Ozcelik, B., 2011. Optimization of injection parameters for mechanical properties of specimens with weld line of polypropylene using Taguchi method. Int. Commun. Heat Mass Transfer, 38: 1067-1072.
CrossRef  |  

Ozcelik, B., A. Ozbay and E. Demirbas, 2010. Influence of injection parameters and mold materials on mechanical properties of ABS in plastic injection molding. Intl. Commun. Heat Mass Transfer, 37: 1359-1365.
Direct Link  |  

Rajesh, J.J., J. Soulestin, M.F. Lacrampe and P. Krawczak, 2012. Effect of injection molding parameters on nanofillers dispersion in masterbatch based PP-clay nanocomposites. Express Polymer Lett., 6: 237-248.
CrossRef  |  Direct Link  |  

Ray, S.S. and M. Okamoto, 2003. Polymer/layered silicate nanocomposites: A review from preparation to processing. Progress Polym. Sci., 28: 1539-1641.
CrossRef  |  Direct Link  |  

Tanyildizi, H., 2009. Statistical analysis for mechanical properties of polypropylene fiber reinforced lightweight concrete containing silica fume exposed to high temperature. Mater. Design, 30: 3252-3258.
Direct Link  |  

Tsai, K.M., C.Y. Hsieh and W.C. Lo, 2009. A study of the effects of process parameters for injection molding on surface quality of optical lenses. J. Mater. Process. Technol., 209: 3469-3477.
Direct Link  |  

Wallenberger, F.T. and N. Weston, 2003. Natural Fibers, Plastics and Composites. Springer, Berlin, German, ISBN:1-4020-7643-6, Pages: 365.