References

Alman, D.E. and J.A. Hawk, 2001. Abrasive wear behavior of a brittle matrix (MoSi 2) composite reinforced with a ductile phase (Nb). Wear, 251: 890-900.
Direct Link  |  

Boch, P. and J.C. Niepce, 2010. Ceramic Materials: Processes, Properties and Applications. Vol. 98, John Wiley & Sons, Hobokon, New Jersey, USA., ISBN:978-1-905209-23-1, Pages: 567.

Chen, R.Z. and W.H. Tuan, 2001. Toughening alumina with silver and zirconia inclusions. J. Eur. Ceram. Soc., 21: 2887-2893.
Direct Link  |  

Chou, W.B. and W.H. Tuan, 1995. Toughening and strengthening of alumina with silver inclusions. J. Eur. Ceram. Soc., 15: 291-295.
CrossRef  |  Direct Link  |  

Clegg, R.E. and G.D. Paterson, 2004. Ductile particle toughening of hydroxyapatite ceramics using platinum particles. Proceedings of the International Conference on Structural Integrity and Fracture (SIF'04), September 26-29, 2004, Brisbane, Australia, pp: 47-53.

Dessai, R.R., J.A.E. Desa, D. Sen and S. Mazumder, 2013. Effects of pressure and temperature on pore structure of ceramic synthesized from rice husk: A small angle neutron scattering investigation. J. Alloys Comp., 564: 125-129.
CrossRef  |  Direct Link  |  

Eom, J.H., Y.W. Kim and S. Raju, 2013. Processing and properties of macroporous silicon carbide ceramics: A review. J. Asian Ceram. Soc., 1: 220-242.
Direct Link  |  

Falamaki, C., A. Aghaei and N.R. Ardestani, 2001. RBAO membranes/catalyst supports with enhanced permeability. J. Eur. Ceram. Soc., 21: 2267-2274.
Direct Link  |  

German, R.M., P. Suri and S.J. Park, 2009. Review: Liquid phase sintering. J. Mater. Sci., 44: 1-39.
CrossRef  |  Direct Link  |  

Gu, M., C. Huang, B. Zou and B. Liu, 2006. Effect of (Ni, Mo) and TiN on the microstructure and mechanical properties of TiB 2 ceramic tool materials. Mater. Sci. Eng. A, 433: 39-44.
Direct Link  |  

Hammel, E.C., O.R. Ighodaro and O.I. Okoli, 2014. Processing and properties of advanced porous ceramics: An application based review. Ceram. Intl., 40: 15351-15370.
Direct Link  |  

Hu, L., R. Benitez, S. Basu, I. Karaman and M. Radovic, 2012. Processing and characterization of porous Ti₂ AlC with controlled porosity and pore size. Acta Materialia, 60: 6266-6277.
Direct Link  |  

Jean, G., V. Sciamanna, M. Demuynck, F. Cambier and M. Gonon, 2014. Macroporous ceramics: Novel route using partial sintering of alumina-powder agglomerates obtained by spray-drying. Ceram. Intl., 40: 10197-10203.
Direct Link  |  

Ji, Y. and J.A. Yeomans, 2002. Processing and mechanical properties of Al 2 O 3-5 vol.% Cr nanocomposites. J. Eur. Ceram. Soc., 22: 1927-1936.
Direct Link  |  

Kafkaslıoglu, B. and Y.K. Tur, 2016. Pressureless sintering of Al 2 O 3/Ni nanocomposites produced by heterogeneous precipitation method with varying nickel contents. Intl. J. Refract. Metals Hard Mater., 57: 139-144.
Direct Link  |  

Kennedy, G.P., K.Y. Lim, Y.W. Kim, I.H. Song and H.D. Kim, 2011. Effect of SiC particle size on flexural strength of porous self-bonded SiC ceramics. Metals Mater. Intl., 17: 599-605.
CrossRef  |  Direct Link  |  

Lalande, J., S. Scheppokat, R. Janssen and N. Claussen, 2002. Toughening of alumina/zirconia ceramic composites with silver particles. J. Eur. Ceram. Soc., 22: 2165-2171.
Direct Link  |  

Li, G., Y. Fan, Y. Zheng and Y. Wu, 2010. Preparation and properties of high toughness RBAO macroporous membrane support. Ceram. Int., 36: 2025-2031.
CrossRef  |  

Lieberthal, M. and W.D. Kaplan, 2001. Processing and properties of Al₂O₃ nanocomposites reinforced with sub-micron Ni and NiAl₂O₄. Mater. Sci. Eng. A, 302: 83-91.
Direct Link  |  

Liu, D.M. and W.H. Tuan, 1997. Microstructure and its influence on thermal and electrical conductivity of ZrO₂-Ag composites. Mater. Chem. Phys., 48: 258-262.
Direct Link  |  

Liu, D.M., 1997. Influence of porosity and pore size on the compressive strength of porous hydroxyapatite ceramic. Ceram. Intl., 23: 135-139.
CrossRef  |  Direct Link  |  

Liu, Y., J. Zhou and T. Shen, 2013. Effect of nano-metal particles on the fracture toughness of metal-ceramic composite. Mater. Des., 45: 67-71.
Direct Link  |  

Menchavez, R.L. and L.A.S. Intong, 2010. Red clay-based porous ceramic with pores created by yeast-based foaming technique. J. Mater. Sci., 45: 6511-6520.
CrossRef  |  Direct Link  |  

Mohanta, K., A. Kumar, O. Parkash and D. Kumar, 2014. Processing and properties of low cost macroporous alumina ceramics with tailored porosity and pore size fabricated using rice husk and sucrose. J. Eur. Ceram. Soc., 34: 2401-2412.
Direct Link  |  

Oh, S.T., M. Sando, T. Sekino and K. Niihara, 1998. Processing and properties of copper dispersed alumina matrix nanocomposites. Nanostruct. Mater., 10: 267-272.
Direct Link  |  

Oh, U.C., Y.S. Chung, D.Y. Kim and D.N. Yoon, 1988. Effect of grain growth on pore coalescence during the liquid‐phase sintering of MgO‐CaMgSiO₄ systems. J. Am. Ceram. Soci., 71: 854-857.
CrossRef  |  Direct Link  |  

Rosler, J., H. Harders and M. Baeker, 2007. Mechanical Behaviour of Engineering Materials: Metals, Ceramics, Polymers and Composites. Springer, Berlin, Germany,.

Sbaizero, O. and G. Pezzotti, 2001. Residual stresses and R-curve behavior of AlN/Mo composite. J. Eur. Ceram. Soc., 21: 269-275.
Direct Link  |  

Seeber, B.S.M., U.T. Gonzenbach and L.J. Gauckler, 2013. Mechanical properties of highly porous alumina foams. J. Mater. Res., 28: 2281-2287.
Direct Link  |  

Shaw, T.M., 1993. Model for the effect of powder packing on the driving force for liquid‐phase sintering. J. Am. Ceram. Soc., 76: 664-670.
CrossRef  |  Direct Link  |  

Smirnov, A. and J.F. Bartolome, 2014. Microstructure and mechanical properties of ZrO 2 ceramics toughened by 5-20vol% Ta metallic particles fabricated by pressureless sintering. Ceram. Intl., 40: 1829-1834.
Direct Link  |  

Tang, F., H. Fudouzi, T. Uchikoshi and Y. Sakka, 2004. Preparation of porous materials with controlled pore size and porosity. J. Eur. Ceram. Soc., 24: 341-344.
Direct Link  |  

Veljovic, D., R.J. Hajneman, I. Balac, B. Jokic and S. Putic et al., 2011. The effect of the shape and size of the pores on the mechanical properties of porous HAP-based bioceramics. Ceram. Intl., 37: 471-479.
Direct Link  |  

Wang, S.R., H.R. Geng, L.H. Hui and Y.Z. Wang, 2007. Reticulated porous multiphase ceramics with improved compressive strength and fracture toughness. J. Mater. Eng. Perform., 16: 113-118.
CrossRef  |  Direct Link  |  

William, D.C. and G.R. David, 2010. Materials Science and Engineering. 8th Edn., John Wiley & Sons, Hobokon, New Jersey, USA.,.

Zhang, R., D. Fang, Y. Pei and L. Zhou, 2012. Microstructure, mechanical and dielectric properties of highly porous silicon nitride ceramics produced by a new water-based freeze casting. Ceram. Intl., 38: 4373-4377.
Direct Link  |  

Zhou, J., J.P. Fan, G.L. Sun, J.Y. Zhang and X.M. Liu et al., 2015. Preparation and properties of porous silicon nitride ceramics with uniform spherical pores by improved pore-forming agent method. J. Alloys Compd., 632: 655-660.
Direct Link  |  

Zuo, K.H., D.L. Jiang, Q.L. Lin and Y.P. Zeng, 2007. Improving the mechanical properties of Al 2 O 3/Ni laminated composites by adding Ni particles in Al ₂O₃ layers. Mater Sci. Eng. A, 443: 296-300.
Direct Link  |