Journal of Engineering and Applied Sciences
Year:
2017
Volume:
12
Issue:
9
Page No.
2383 - 2387
References
Artola, P.A., F.E. Pereira, C.S. Adjiman, A. Galindo and E.A. Muller
et al., 2011. Understanding the fluid phase behaviour of crude oil: Asphaltene precipitation. Fluid Phase Equilib., 306: 129-136.
Direct Link | Bayat, M., J. Aminian, M. Bazmi, S. Shahhosseini and K. Sharifi, 2012. CFD modeling of fouling in crude oil pre-heaters. Energy Convers. Manage., 64: 344-350.
Direct Link | Coletti, F. and G. Hewitt, 2014. Crude Oil Fouling: Deposit Characterization, Measurements and Modeling. Gulf Publishing Company, USA., ISBN:9780128013595, Pages: 360.
Deshannavar, U.B., M.S. Rafeen, M. Ramasamy and D. Subbarao, 2010. Crude oil fouling: A review. J. Applied Sci., 10: 3167-3174.
CrossRef | Emani, S., M. Ramasamy and K.Z.B.K. Shaari, 2016. Effect of shear stress on crude oil fouling in a heat exchanger tube through cfd simulations. Procedia Eng., 148: 1058-1065.
Direct Link | Fontoura, D.V.R., E.M. Matos and J.R. Nunhez, 2013. A three-dimensional two-phase flow model with phase change inside a tube of petrochemical pre-heaters. Fuel, 110: 196-203.
Direct Link | Haghshenasfard, M. and K. Hooman, 2015. CFD Modeling of Asphaltene Deposition Rate from Crude Oil. J. Pet. Sci. Eng., 128: 24-32.
CrossRef | Direct Link | Jamialahmadi, M., B. Soltani, S.H. Muller and D. Rashtchian, 2009. Measurement and prediction of the rate of deposition of flocculated asphaltene particles from oil. Int. J. Heat Mass Transfer, 52: 4624-4634.
Direct Link | Landry, X., A. Runstedtler, S. Papavinasam and T.D. Place, 2012. Computational fluid dynamics study of solids deposition in heavy oil transmission pipeline. Corros., 68: 904-912.
Leontaritis, K.J. and G.A. Mansoori, 1988. Asphaltene deposition: A survey of field experiences and research approaches. J. pet. Sci. Eng., 1: 229-239.
Direct Link | Sileri, D., K. Sahu, H. Ding and O.K. Matar, 2009. Mathematical modelling of asphaltenes deposition and removal in crude distillation units. Proceedings of the International Conference on Heat Exchanger Fouling and Cleaning VIII-2009, June 14-19, 2009, Imperial College London, Schladming, Austria, pp: 245-251.
Srinivasan, M., 2008. Heat exchanger fouling of some canadian crude oils. Ph.D Thesis, University of British Columbia, Vancouver, British Columbia. https://open.library.ubc.ca/cIRcle/collections/ubctheses/24/items/1.0058527
Yang, J., M.G.J. Serratos, A.D.S. Fari, E.A. Muller and O.K. Matar, 2015. Crude oil fouling: Fluid dynamics, reactions and phase change. Procedia IUTAM., 1: 186-193.
Direct Link | Yang, M., A. Young and B.D. Crittenden, 2009. Use of CFD to correlate crude oil fouling against surface temperature and surface shear stress in a stirred fouling apparatus. Proceedings of the International Conference on Heat Exchanger Fouling and Cleaning VIII-2009, June 14-19, 2009, University of Bath, Schladming, Austria, pp: 272-280.
Zhang, J. and A. Li, 2008. CFD simulation of particle deposition in a horizontal turbulent duct flow. Chem. Eng. Res. Design, 86: 95-106.
CrossRef | Direct Link |