References

Chang, C.Y., 2007. Adpative fuzzy controller of the overhead cranes with nonlinear disturbance. J. IEEE Trans. Ind. Informatics, 3: 164-172.
CrossRef  |  

Hamalainen, J.J., A. Marttinen, L. Baharova and J. Virkkunen, 1995. Optimal path planning for a trolley crane: Fast and smooth transfer of load. IEE. Proc. Control Theory Appl., 142: 51-57.
CrossRef  |  Direct Link  |  

Harmas, M.N., 2016. Synergetic control and synchronisation of chaotic systems. Intl. J. Control Autom. Commun. Syst., 1: 31-39.
CrossRef  |  Direct Link  |  

Hong, K.S., B.J. Park and M.H. Lee, 2000. Two-stage control for container cranes. JSME. Intl. J. Ser. C Mech. Syst. Mach. Elem. Manuf., 43: 273-282.
Direct Link  |  

Jiang, Z., 2007. Design of power system stabilizers using synergetic control theory. Proceedings of the IEEE Conference on Power Engineering Society General Meeting, June 24-28, 2007, IEEE, Tampa, Florida, USA., pp: 1-8.

Kolesnikov, A., G. Veselov and A. Kolesnikov, 2000. Modern applied control theory: Synergetic approach in control theory. TRTU., 1: 4477-4479.

Lee, H.H. and S.K. Cho, 2001. A new fuzzy-logic anti-swing control for industrial three-dimensional overhead cranes. Proceedings IEEE International Conference on Robotics and Automation ICRA01 Vol. 3, May 21-26, 2001, IEEE, Seoul, South Korea, pp: 2956-2961.

Liu, C.H. and M.Y. Hsiao, 2013. Synchronization on unified chaotic systems via PI-type terminal synergetic control. Proceedings of the 2013 CACS International on Automatic Control Conference (CACS), December 2-4, 2013, IEEE, Nantou, Taiwan, ISBN:978-1-4799-2383-0, pp: 24-29.

Liu, J. and X. Wang, 2012. Advanced Sliding Mode Control for Mechanical Systems: Design, Analysis and MATLAB Simulation. Springer, Berlin, Germany, ISBN:978-3-624-20907-9, Pages: 355.

Manson, G.A., 1992. Time-optimal control of and overhead crane model. Optimal Control Appl. Methods, 3: 115-120.

Nazemizadeh, M., 2013. A PID tuning method for tracking control of an underactuated gantry crane. Universal J. Eng. Mech., 1: 45-49.
Direct Link  |  

Omar, H.M., 2003. Control of gantry and tower cranes. Ph.D. Thesis, Virginia Polytechnic Institute and State University, Blacksburg, Virginia.

Park, M.S., D. Chwa and S.K. Hong, 2008. Antisway tracking control of overhead cranes with system uncertainty and actuator nonlinearity using an adaptive fuzzy sliding-mode control. IEEE Trans. Ind. Electron., 55: 3972-3984.
CrossRef  |  

Qian, D., J. Yi and D. Zhao, 2011. Control of overhead crane systems by combining sliding mode with fuzzy regulator. IFAC. Proc. Vol., 44: 9320-9325.
CrossRef  |  Direct Link  |  

Santi, E., A. Monti, D. Li, K. Proddutur and R.A. Dougal, 2003. Synergetic control for DC-DC boost converter: Implementation options. IEEE. Trans. Ind. Appl., 39: 1803-1813.
CrossRef  |  Direct Link  |  

Shyu, K.K., C.L. Jen and L.J. Shang, 2005. Design of sliding-mode controller for anti-swing control of overhead cranes. Proceedings of the 31st Annual Conference on Industrial Electronics Society IECON05, November 6-10, 2005, IEEE, Raleigh, North Carolina, USA., pp: 147-152.

Singh, A.M., V.T. Hoang, and Q.P. Ha, 2016. Fast terminal sliding mode control for gantry cranes. Proceedings of the International Symposium on Automation and Robotics in Construction ISARC Vol. 33, January 1, 2016, Vilnius Gediminas Technical University, Vilnius, Lithuania, pp: 437-443.

Wang, W., X.D. Liu and J.Q. Yi, 2007. Structure design of two types of sliding-mode controllers for a class of under-actuated mechanical systems. IET. Control Theory Appl., 1: 163-172.
CrossRef  |  Direct Link  |  

Yu, X. and M. Zhihong, 1998. Multi-input uncertain linear systems with terminal sliding-mode control. Automatica, 34: 389-392.
CrossRef  |  Direct Link  |  

Zhai, S., Q. Chen and X. Tang, 2015. Finite-time synergetic control of mechanical system based on model-free friction compensation. Proceedings of the 2015 Conference on Chinese Intelligent Automation Conference, March 18, 2015, Springer, Berlin, Germany, ISBN:978-3-662-46462-5, pp: 275-284.