References

Ahmad, H.H. and R.H. Rajab, 2013. A heat pipe performance with heptane as a working fluid. Eng. Technol. J., 31: 646-660.
Direct Link  |  

Aldabbagh, M.S., 2015. Optimum design of a heat pipe. AL Rafdain Eng. J., 23: 133-146.
Direct Link  |  

Asirvatham, L.G., R. Nimmagadda and S. Wongwises, 2013. Heat transfer performance of screen mesh wick heat pipes using silver-water nanofluid. Intl. J. Heat Mass Trans., 60: 201-209.
CrossRef  |  Direct Link  |  

Bejan, A. and A.D. Kraus, 2003. Heat Transfer Handbook. John Wiley and Sons, New York.

Blaszczuk, A., W. Nowak and J. Krzywanski, 2017. Effect of bed particle size on heat transfer between fluidized bed of group b particles and vertical rifled tubes. Powder Technol., 316: 111-122.
CrossRef  |  Direct Link  |  

Borundia, A. and H.D. Tran, 1995. An experimental investigation of heat pipes at low power inputs. University of New Mexico, Albuquerque, New Mexico.

Guttierrez, F., G. Ke, C. Er and S. Sj, 1998. Preliminary estimate of coriolis force of vapor flow in rotating heat pipes based on analytical solution. Intl. J. Photoenergy, 116: 1116-1117.

Hameed, H.G. and A.M.A. Rageb, 2014. Numerical investigation of the effect of wire screen mesh specification and evaporator length on thermal performance of cylindrical heat pipe. Basrah J. Eng. Sci., 14: 240-254.
Direct Link  |  

Harley, C. and A. Faghri, 1994. Complete transient two-dimensional analysis of two-phase closed thermosyphons including the falling condensate film. ASME J. Heat Transfer, 116: 418-426.
CrossRef  |  Direct Link  |  

He, Y., Y. Jin, H. Chen, Y. Ding and D. Cang et al., 2007. Heat transfer and flow behaviour of aqueous suspensions of TiO₂ nanoparticles (nanofluids) flowing upward through a vertical pipe. Intl. J. Heat Mass Trans., 50: 2272-2281.
CrossRef  |  Direct Link  |  

Jasem, N.M., G.M.H. Fadhil and H.H. Mohammed, 2009. Experimental study of the effect bed density on heat transfer coefficents in towers with gas-solid circulating fluidized bed. Al Qadisiya J. Eng. Sci., 2: 608-619.
Direct Link  |  

Lin, S., J. Broadbent and R. McGlen, 2005. Numerical study of heat pipe application in heat recovery systems. Appl. Therm. Eng., 25: 127-133.
CrossRef  |  Direct Link  |  

Mahjoub, S. and A. Mahtabroshan, 2008. Numerical simulation of a conventional heat pipe. World Acad. Sci. Eng. Technol., 39: 117-122.
Direct Link  |  

Majeed, M.H. and O.R. Skheel, 2016. Experimental study of wick structure material and screen mesh on heat pipe performance. Iraqi J. Mech. Mater. Eng., 16: 339-349.
Direct Link  |  

Reay, D.A., R.J. McGlen and P.A. Kew, 2013. Heat Pipes: Theory, Design and Applications. 6th Edn., Butterworth-Heinemann, Oxford, UK., ISBN:978-0-08-098266-3, Pages: 250.

Yang, X., Y.Y. Yan and D. Mullen, 2012. Recent developments of lightweight, high performance heat pipes. Appl. Therm. Eng., 33: 1-14.
CrossRef  |  Direct Link  |