References

Artoni, A., M. Gabiccini and M. Guiggiani, 2008. Nonlinear identification of machine settings for flank form modifications in hypoid gears. J. Mech. Des., 130: 112602-112610.
CrossRef  |  Direct Link  |  

Gabiccini, M., A. Artoni and M. Guiggiani, 2012. On the identification of machine settings for gear surface topography corrections (DETC2011-47727). ASME J. Mech. Des., Vol. 134. 10.1115/1.4006002

Litvin, F.L. and A. Fuentes, 2004. Gear Geometry and Applied Theory. Cambridge University Press, Cambridge, UK.,.

Litvin, F.L., A. Fuentes and K. Hayasaka, 2006. Design, manufacture, stress analysis and experimental tests of low-noise high endurance spiral bevel gears. Mech. Mach. Theory, 41: 83-118.
Direct Link  |  

Marciniec, A., 2003. Synthesis and Analysis of Meshing for Spur Gears. Rzeszow University, Rzeszow, Poland,.

Muthukumaran, S., A.S. Kumar, S.A. Vendan and S. Kudiyarasan, 2017. Experimental and numerical simulation of magnetic pulses for joining of dissimilar materials with dissimilar geometry using electromagnetic welding process. Intl. J. Appl. Electromagnet. Mech., 53: 237-249.
Direct Link  |  

Sagadevan, S., 2016. Optical and electrical studies of non-linear optical crystal: Potassium boro-oxalate. Optik Intl. J. Light Electron. Opt., 127: 5613-5621.
Direct Link  |  

Selvakumar, V. and N. Manoharan, 2014. Thermal properties of polypropylene/montmorillonite nanocomposites. Indian J. Sci. Technol., 7: 136-139.
Direct Link  |  

Suresh, S., 2016. Growth, optical, dielectric and ferroelectric properties of non-linear optical single crystal: Glycine-phthalic acid. J. Electron. Mater., 11: 5904-5909.
CrossRef  |  Direct Link  |