Journal of Aquaculture Feed Science and Nutrition

Year: 2009
Volume: 1
Issue: 1
Page No. 6 - 21

Effects of Ingredients and Extrusion Parameters on Aquafeeds Containing DDGS and Tapioca Starch

Authors : S. Kannadhason , K. Muthukumarappan and Kurt A. Rosentrater

References

AACC, 2000. Method 44-19, Moisture-air Oven Method, Drying at 135°C. 10th Edn., American Association of Cereal Chemists (AACC), St. Paul, MN., USA.

ASAE, 2004. Engineering Standards, Practices and Data. ASAE, St. Joseph, MI., USA.

Aguilera, J.M. and D.W. Stanley, 1999. Micro Structural Principles of Food Processing and Engineering. 2nd Edn., Springer, New Jersey, ISBN: 08-34212560, pp: 1-432.

Anderson, R.A., H.F. Conway, V.F. Pfeifer and L.E.J. Griffin, 1969. Gelatinization of corn grits by roll and extrusion cooking. Cereal Sci. Today, 14: 4-11.

Badrie, N. and W.A. Mellowes, 1991. Effects of extrusion variables on cassava starch extrudates. J. Food Sci., 56: 1334-1337.
CrossRef  |  

Bhattacharya, S. and M.A. Hanna, 1986. Viscosity modelling of dough in extrusion. J. Food Process Eng., 21: 167-174.
CrossRef  |  Direct Link  |  

Bouvier, M.H., G. Fayard and J.T. Clayton, 1987. Flow rate and heat transfer modeling in extrusion cooking of soy protein. J. Food Eng., 6: 123-141.
CrossRef  |  

Brouillet-Fourmann, S., C. Carrot and N. Mignard, 2003. Gelatinization and gelation of corn starch followed by dynamic mechanical spectroscopy analysis. Rheol. Acta, 42: 110-117.
CrossRef  |  Direct Link  |  

Chang, Y.K., F.B. Martinez, T.S. Park and J.L. Kokini, 1999. The influence of specific mechanical energy on corn meal viscosity measured by an on-line system during twin-screw extrusion. Braz. J. Chem. Eng., 16: 285-295.
CrossRef  |  

Chen, A.H., Y.C. Jao, J.W. Larkin and W.E. Goldstein, 1979. Rheological model of soy dough in extrusion. J. Food Eng., 2: 337-342.

Chevanan, N., K. Muthukumarappan and K.A. Rosentrater, 2009. Extrusion studies of aquaculture feed using distillers dried grains with solubles and whey. Food Bioprocess Technol., 2: 177-185.
Direct Link  |  

Chevanan, N., K. Muthukumarappan, K.A. Rosentrater and J.L. Julson, 2007. Effect of die dimensions on extrusion processing parameters and properties of DDGS-based aquaculture feeds. Cereal Chem., 84: 389-398.
CrossRef  |  

Chevanan, N., K.A. Rosentrater and K. Muthuku-Marappan, 2008. Effects of processing conditions on feed ingredients containing DDGS in single screw extrusion. Food Bioprocess Technology, pp: 1-10.

Chevanan, N., K.A. Rosentrater and K. Muthuku-marappan, 2007. Effect of DDGS, moisture content and screw speed on physical properties of extrudates. Cereal Chem., 85: 132-139.
CrossRef  |  

Chevanan, N., K.A. Rosentrater and K. Muthukumarappan, 2007. Twin-screw extrusion processing of feed blends containing distillers dried grains with solubles (DDGS). Cereal Chem., 84: 428-436.
CrossRef  |  

Chinnaswamy, R. and M.A. Hanna, 1988. Optimum extrusion cooking conditions for maximum expansion of corn starch. J. Food Sci., 53: 834-836.
CrossRef  |  

Chinnaswamy, R., M.A. Hanna and H.F. Zobel, 1989. Microstructural, physico-chemical and macromolecular changes in extrusion-cooked and retrograded corn starch. Cereal Food World, 34: 415-422.

Colonna, P. and C. Mercier, 1983. Macromolecular modifications of manioc starch components by extrusion-cooking with and without lipids. Carbohydr. Polym., 3: 87-108.
CrossRef  |  Direct Link  |  

Colonna, P., J.L. Doublier, J.P. Melcion, F.D. Monredon and C. Mercier, 1984. Extrusion cooking and drum drying of wheat starch. I. Physical and macromolecular modifications. Cereal Chem., 61: 538-543.
Direct Link  |  

Conway, H.F. and R.A. Anderson, 1973. Protein fortified extruded food products. Cereal Sci. Today, 18: 18-97.

Davidson, V.J., D. Paton, L.L. Diosady and G. Larocque, 1984. Degradation of wheat starch in a single screw extruder: characteristics of extruded starch polymers. J. Food Sci., 49: 453-458.
CrossRef  |  

Davis, A.T. and R.R. Stickney, 1978. Growth responses of Tilapia aurea to dietary protein quality and quantity. J. Am. Fish. Soc., 107: 479-483.
CrossRef  |  

Friesen, K.G., J.L. Nelssen, K.C. Behnke and R.D. Goodband, 1992. Ingredient processing: Improving pig feed by extrusion. Feed Manage., 43: 33-38.

Gomez, M.H. and J.M. Aguilera, 1984. A physicochemical model for extrusion of corn starch. J. Food Sci., 49: 40-43.
CrossRef  |  Direct Link  |  

Gonzalez, R.J., R.L. Torres, D.M.D. Greef and B.A. Guadalupe, 2005. Effects of extrusion conditions and structural characteristics on melt viscosity of starchy materials. J. Food Eng., 74: 96-107.
CrossRef  |  

Guha, M., S.Z. Ali and S. Bhattacharya, 1997. Twin screw extrusion of rice flour without a die: Effect of barrel temperature and screw speed on extrusion and extrudates characteristics. J. Food Eng., 32: 251-267.
CrossRef  |  

Hashimoto, J.M. and M.V.E. Grossman, 2003. Effects of extrusion conditions on quality of cassava bran/cassava starch extrudates. Int. J. Food Sci. Technol., 38: 511-517.
CrossRef  |  

Himadri, K.D., M.H. Tapani, O.M. Myllymaki and Y. Malkki, 1993. Effects of formulation and processing variables on dry fish feed pellets containing fish waste. J. Sci. Food Agric., 61: 181-187.
CrossRef  |  

Jamin, F.F. and R.A. Flores, 1998. Effect of separation and grinding of corn dry-milled streams on physical properties of single-screw low speed extruded products. Cereal Chem., 75: 775-779.

Kannadhason, S., K. Muthukumarappan and K.A. Rosentrater, 2007. Effect of Starch Sources on Extruded Aquaculture Feed Containing DDGS. ASABE, St. Joseph, MI.

Kannadhason, S., K. Muthukumarappan and N. Chevanan, 2007. Effect of Starch Sources on Properties of Extrudates Containing DDGS. ASABE, St. Joseph, MI.

Kazamzadeh, M., 1989. Fish feeds extrusion technology. Feed Manage., 40: 24-28.

Kim, C.N., A.M. Joseph and T.M. Jeffery, 1989. Properties of extruded dried distillers grains DDG and flour blends. J. Food Process Preservat., 13: 219-231.
CrossRef  |  

Kokini, J.L., C.N. Chang and L.S. Lai, 1992. The Role of Rheological Properties on Extrudates Expansion. In: Food Extrusion Science and Technology, Kokini, J.L., C.T. Ho and M.V. Karwe (Eds.). Marcel Dekker Inc., New York, pp: 361-652.

Launay, B. and J.M. Lisch, 1983. Twin screw extrusion cooking of starches. Flow behavior of starch pastes, expansion and mechanical properties of extrudates. J. Food Eng., 2: 259-280.
CrossRef  |  

Lin, S., H.E. Huff and F. Hsieh, 2000. Texture and chemical characteristics of soy protein meat analog extruded at high moisture. J. Food Sci., 65: 264-269.
CrossRef  |  

Linko, P., P. Colonna and C. Mercier, 1981. High Temperature Extrusion Cooking. In: Advances in Cereal Science and Technology, Pomeranz, Y. (Ed.). American Association of Cereal Chemists, St. Paul, MN., pp: 145-235.

Lovell, T., 1988. Nutrition and Feeding of Fish. 1st Edn., Van Nostrand Reinhold, New York, ISBN: 044-2259271, Pages: 260.

Lue, S., F. Hsieh, I.C. Peng and H.E. Huff, 1990. Expansion of corn extrudates containing dietary fiber: A microstructure study. Lebensm Wiss Technol., 23: 165-173.
Direct Link  |  

Mercier, C., P. Linko and J.M. Harper, 1989. Extrusion Cooking. American Association of Cereal Chemists, St. Paul, MN., USA., Pages: 471.

Miller, R.C., 1985. Low moisture extrusion: Effects of cooking moisture on product characteristics. J. Food Sci., 50: 249-253.
CrossRef  |  

Ng, W.K., 2003. The potential use of palm kernel meal in aquaculture feeds. Aquac. Asia, 8: 38-39.
Direct Link  |  

Noel, T.R., S.G. Ring and W.A. Whittam, 1990. Glass transitions in low-moisture foods. Trends Food Sci. Technol., 1: 62-67.
CrossRef  |  

Oliveira, M.A., S.H. Moller, H. Haaland and G. Rosenlund, 1992. The Effects of Process Parameters on Expansion of Extruded Fish Feeds. In: Food Extrusion Science and Technology, Kokini, J.L. and M.V. Karwe (Eds). Marcel Dekker, New York, ISBN: 08 24785428, pp: 693-709.

Onwulata, C.I., P.W. Smith, R.P. Konstance and V.H. Holsinger, 2001. Incorporation of whey products in extruded corn, potato or rice snacks. Food Res. Int., 34: 679-687.
CrossRef  |  

Paton, D. and W.A. Spratt, 1984. Component interactions in the extrusion cooking process: Influence of process conditions on the functional viscosity of the wheat flour system. J. Food Sci., 49: 1380-1385.
CrossRef  |  

Politz, M.L., J.D. Timpa, A.R. White and B. P. Wasserman, 1994. Non aqueous gel permeation chromatography of wheat starch in dimethyl aetamide (DMAC) and LiCl: Extrusion-induced fragmentation. Carbohyd. Polymer, 24: 91-99.

Riaz, M.N., 1997. Using extrusion to make floating and sinking fish feed: Controlling the water stability of feed. Feed Manage., 48: 21-24.

Rokey, G. and G. Plattner, 2003. A practical approach to aqua feed extrusion. Feed Manage., 54: 24-27.

Rokey, G. and G. Plattner, 2004. Extruded aqua feeds: Controlling buoyancy. Feed Manage., 55: 6-11.

Rolfe, L.A., H.E. Huff and F. Hseih, 2001. Effects of particle size and processing variables on the properties of an extruded catfish feed. J. Aquac. Food Prod. Technol., 10: 21-33.
CrossRef  |  

Rosentrater, K.A., T.L. Richard, C.J. Bern and R.A. Flores, 2005. Small scale extrusion of corn masa byproducts. Cereal Chem., 82: 436-446.
CrossRef  |  

Scheideler, S.E., 1995. Is pelleting cost effective? Feed Manage., 46: 21-26.

Shukla, C.Y., K. Muthukumarappan and J.L. Julson, 2005. Effect of single screw extruder die temperature, amount of distillers dried grains with solubles DDGS and initial moisture content on extrudates. Cereal Chem., 82: 34-37.
CrossRef  |  

Shurson, J., 2003. Feeding new generation DDGS to swine. Feed Manage., 54: 17-20.

Sokhey, A.S., A.N. Kollengode and M.A. Hanna, 1994. Screw configuration effects on corn starch expansion during extrusion. J. Food Sci., 59: 895-898, 908-909.
CrossRef  |  

Sriburi, P. and S.E. Hill, 2000. Extrusion of cassava starch with either variations in ascorbic acid concentration or pH. Int. J. Food Sci. Technol., 35: 141-154.
CrossRef  |  Direct Link  |  

Sriburi, P., S.E. Hill and F. Barclay, 1999. Depolymerization of cassava starch. Carbohyd Polymer, 38: 211-218.
CrossRef  |  

Tid, W., J.H.C.D. Webster and D.H. Yancey, 1990. Evaluation of distillers grains with solubles in prepared channel catfish diets. Trans. Kentucky Acad. Sci., 51: 135-138.

Turner, R., 1995. Achieving optimum pellet quality. Feed Manage., 46: 30-33.

US Grains Council, 2008. Use of DDGS in aquaculture diets. DDGS User Handbook.

USDA., 1999. Practical procedures for grain handlers: Inspecting grain. United States Department of Agriculture-Grain Inspection, Packers and Stockyards Administration, USA.

Van Lengerich, B., 1990. Influence of Extrusion Processing on in-line Rheological Behavior, Structure and Function of Wheat Starch. In: Dough Rheology and Baked Product Texture, Fairidi, H. and J.M. Faubion (Eds.). Van Nostrand Reinhold, New York, ISBN: 0442317964, pp: 421-471.

Webster, C.D., J.H. Tidwell and L.S. Goodgame, 1993. Growth, body composition and organoleptic evaluation of channel catfish fed diets containing different percentages of distillers grains with solubles. Prog. Fish. Cult., 55: 95-100.
CrossRef  |  

Wen, L.F., P. Rodis and B.P. Wasserman, 1990. Starch fragmentation and protein insolubilization during twin-screw extrusion of corn meal. Cereal Chem., 67: 268-275.
Direct Link  |  

Williams, M.A., 1991. Feed processing extruded starter pig feeds. Feed Manage., 42: 20-23.

Wu, Y.V., R.R. Rostagi, D.J. Sessa and P.B. Brown, 1996. Effects of diets containing various levels of protein and ethanol coproducts from corn on growth of tilapia fry. J. Agric. Food Chem., 44: 1491-1493.
CrossRef  |  

Design and power by Medwell Web Development Team. © Medwell Publishing 2024 All Rights Reserved