References

Anusavice, K.J. and R.W. Phillips, 2003. Phillips Science of Dental Materials. 11th Edn., W.B. Saunders Co., Philadelphia, ISBN-13: 9780721693873, pp: 805.

Arikawa, H., K. Jyoshin and S. Nakazawa, 1981. Studies on the distortion of the cast crown by measuring volume change (author`s transl). Shika Rikogaku Zasshi, 22: 114-118.
PubMed  |  

Davis, D.R., 1996. Effect of wet and dry cellulose ring liners on setting expansion and compressive strength of a gypsum-bonded investment. J. Prosthet. Dent., 76: 519-523.
PubMed  |  

Davis, D.R., J.H. Nguyen and B.L. Grey, 1992. Ring volume/ring liner ratio and effective setting expansion. Int. J. Prosthodont., 5: 403-408.
PubMed  |  

Dern, W.M., R.W. Hinman, R.A. Hesby and G.B. Pelleu Jr., 1985. Effect of a two-step ringless investment technique on alloy castability. J. Prosthet. Dent., 53: 874-876.
CrossRef  |  

Earnshaw, R., 1988. The effect of casting ring liners on the potential expansion of a gypsum-bonded investment. J. Dent. Res., 67: 1366-1370.
PubMed  |  

Engelman, M.A., L.D. Cooke and V. Zamaloff, 1989. Oval ringless casting: Simplicity, productivity and accuracy without the health hazards of ring liners. Trends Tech. Contemp. Dent. Lab., 6: 38-42.
PubMed  |  

Engelman, M.A., V. Zamaloff and L.D. Cooke, 1985. Ringless casting with noble or base metal alloys for greater simplicity, economy and productivity. Trends Tech. Contemp. Dent. Lab., 2: 12-16.
PubMed  |  

Finger, W. and K. Kota, 1982. A modified phosphate-bonded casting investment. Eur. J. Oral Sci., 90: 243-248.
CrossRef  |  

Finger, W. and K.D. Jorgensen, 1980. An improved dental casting investment. Scand. J. Dent. Res., 88: 278-284.
PubMed  |  

Fusayama, T., 1959. Factors and technique of precious casting. J. Prosthet. Dent., 9: 486-497.

Gil, L., B.K. Moore and R. Dykema, 1982. Fit of full crown cast using three ring liner materials. J. Dent. Res., 61: 344-344.

Harms, E.J. and E.R. Harms, 2003. Investing for a precision fit. J. Dent. Technol., 20: 30-32.

Jorgensen, K.D. and W. Finger, 1979. Die-spacing technique by diffusion precipitation. Eur. J. Oral Sci., 87: 73-78.
CrossRef  |  

Junner, R.E. and L. Stevens, 1986. Anisotropic setting expansion of phosphate bonded investment. Aust. Dent. J., 31: 434-439.
CrossRef  |  

Keyf, F. and G. Erman, 2000. Full-crown castings made with water-saturated and dry casting ring liners. J. Biomater. Appl., 14: 399-408.
PubMed  |  

Lombardas, P., A. Carbunaru, M.E. McAlarney and R.W. Toothaker, 2000. Dimensional accuracy of castings produced with ringless and metal ring investment systems. J. Prosthet. Dent., 84: 27-31.
PubMed  |  

Mackert Jr. J.R., 1988. An expert system for analysis of casting failures. Int. J. Prosthodont., 1: 268-280.
PubMed  |  

Mahler, D.B. and A.B. Ady, 1963. The influence of various factors on the effective setting expansion of casting investments. J. Prosthet. Dent., 13: 365-373.

Morey, E.F. and R. Earnshaw, 1992. The fit of gold-alloy full-crown castings made with pre-wetted casting ring liners. J. Dent. Res., 71: 1858-1864.
CrossRef  |  

Rosenstiel, S.F., M.F. land and J. Fujimoto, 2006. Contemporary Fixed Prosthodontics. 4th Edn., Mosby, Inc., St. Louis, pp: 209-258.

Schilling, E.R., B.H. Miller, R.D. Woody, A.W. Miller and M.E. Nunn, 1999. Marginal gap of crowns made with a phosphate-bonded investment and accelerated casting method. J. Prosthet. Dent., 81: 129-134.
PubMed  |  

Shell, J.S., 1968. Setting and thermal expansion of investments. II. Effects of: Changes in water/powder ratio, dry vs. wet liners and liner short on one end of ring only. J. Ala. Dent. Assoc., 52: 22-25.
PubMed  |  

Shell, J.S., 1969. Setting and thermal expansion of investments. 3. Effects of: no asbestos liner, coating asbestos with petroleum jelly and double asbestos liner. J. Ala. Dent. Assoc., 53: 31-34.
PubMed  |  

Shilingburg, H.T., S. Hobo, L.D. Whitsett, R. Jacobi and S.E. Brackett, 1997. Fundamentals of Fixed Prosthodontics. 3rd Edn., Quintessence Publishing Co. Inc., Chicago, Illinois.

Suffert, L.W. and D.B. Mahler, 1995. Reproducibility of gold castings made by present day dental casting techniques. J. Am. Dent. Assoc., 50: 1-6.

Takahashi, H., H. Nakamura, N. Iwasaki, N. Morita, N. Habu and F. Nishimura, 1994. Variables effecting casting accuracy of quick heating casting investments. Kokubyo Gakkai Zasshi, 61: 242-249.
PubMed  |  

Wang, W.X. and Y.L. Chao, 2005. Effect of two different ring liner thickness on the precision of castings. Hua Xi Kou Qiang Yi Xue Za Zhi, 23: 21-23.
PubMed  |